|
|
|
|
Joined: Jan 2009
Posts: 851 Likes: 1
Member
|
OP
Member
Joined: Jan 2009
Posts: 851 Likes: 1 |
I have a customer with a R11 basic mode system that was wanting some configuration changes. I thought before I would deploy, I would test those settings on my test system on the bench.
I have an R11 chassis with R11 in Essential Mode. I defaulted the system so that I could load their config in Basic Mode. The system comes up and I can login via Manager to the chassis and it is in Basic Mode, however, the phones (1416's) all say No License Available. What license is it looking for? If I add my R11 license back to the configuration, it does not change. If I convert the system back to Essential Mode, the phones are just fine. Must be missing a step here somewhere.
|
|
|
|
|
Joined: Aug 2002
Posts: 1,072 Likes: 1
Member
|
|
Member
Joined: Aug 2002
Posts: 1,072 Likes: 1 |
I thought R11 would not allow basic mode?
|
|
|
|
|
Joined: Jan 2009
Posts: 851 Likes: 1
Member
|
|
OP
Member
Joined: Jan 2009
Posts: 851 Likes: 1 |
Best I know, Basic is still valid even in R11. I just can't seem to get it to operate correctly on my test unit.
|
|
|
|
Forums84
Topics94,291
Posts638,815
Members49,767
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
113
guests, and
362
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
