|
|
|
|
Joined: Mar 2012
Posts: 120 Likes: 1
Member
|
OP
Member
Joined: Mar 2012
Posts: 120 Likes: 1 |
Hopefully this will be my last post for a bit, everything else is working perfectly on this OS100 system I'm reviving. Thanks to nameless and PVJ for your help so far.
Only trunk is a PRI. Protocol type is NI2 and every channel is set for NI2 in mmc 430. Only getting caller ID number. No name. I see "No CLI name" on line 1, and the calling number on line 2 of the display. The name is definitely being sent (tested using an Avaya IP Office). I'm looking through other mmc's for clues but not finding anything.
MCP is running 2.69. TEPRI card is running firmware version 1.05.
Any ideas?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Mar 2012
Posts: 120 Likes: 1
Member
|
|
OP
Member
Joined: Mar 2012
Posts: 120 Likes: 1 |
Hmm. You can disregard. I tried changing the protocol to ESS5 on both ends (PRI is coming from a Cisco router). It's working as expected now.
Odd. I've always had the best luck with NI2.
|
|
|
|
Forums84
Topics94,306
Posts638,894
Members49,771
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
77
guests, and
35
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
