|
Joined: Mar 2019
Posts: 8
Member
|
OP
Member
Joined: Mar 2019
Posts: 8 |
First post. Hi all
Does anyone have experience with making SIP trunks from ESI work on a Toshiba CIX 40 with a GIPU IP card? Any assistance is appreciated.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Aug 2002
Posts: 4,928 Likes: 1
Administrator
|
Administrator
Joined: Aug 2002
Posts: 4,928 Likes: 1 |
Sorry I had to chuckle when I read this and wondered why wouldn't ESI tech support help resolve a Toshiba issue, I know that isnt any value or support but it is funny. Let me go through the basics. Do you have Network Emanager to access the system programming? Is the GIPU and CIX40 software up to date? Do you have licenses for SIP trunks?
|
|
|
|
Joined: Aug 2002
Posts: 2,608
Moderator-ESI, Shoretel
|
Moderator-ESI, Shoretel
Joined: Aug 2002
Posts: 2,608 |
I would think ESI would absolutely offer tech support on their SIP trunks. This isn't SIP trunking off an ESI KSU but rather ESI selling SIP trunks.
|
|
|
|
Joined: Mar 2019
Posts: 8
Member
|
OP
Member
Joined: Mar 2019
Posts: 8 |
Hi there! Thanks for the responses.
I've been in touch with both ESI and Toshiba tech support, with some success. First, I was able to receive inbound calls. I made some changes per advice I received and now I can make outbound calls, but now inbound goes to fail over number. This whole thing has been kind of like nailing jello to a tree.
We are going to try a different IP configuration as soon as the IT guy gets here.
I've installed and serviced many CIX digital systems, but my experience with the SIP/ISDN side of things is pretty limited.
SSPhone yes, I'm using Network eManager and the CIX firmware is the latest AR 5.20 MT081.00. The GIPU is updated with the latest as well MIPU 0220. SIP trunks are licensed.
|
|
|
|
Joined: Aug 2002
Posts: 4,928 Likes: 1
Administrator
|
Administrator
Joined: Aug 2002
Posts: 4,928 Likes: 1 |
Cool sounds like you have a handle on this. You wouldn't believe how many times those 3 questions save a lot of time. I love the reply license why do I need one I have lines on the system now, yes copper lines.
|
|
|
|
Joined: Mar 2019
Posts: 8
Member
|
OP
Member
Joined: Mar 2019
Posts: 8 |
That's pretty funny!
Thanks for the moral support. I'll come back here if I have anymore questions. Peace.
|
|
|
|
Joined: Mar 2019
Posts: 8
Member
|
OP
Member
Joined: Mar 2019
Posts: 8 |
upstateny That's correct. ESI provided SIP trunks into a CIX 40.
|
|
|
|
Joined: Jun 2005
Posts: 2,709 Likes: 7
Member
|
Member
Joined: Jun 2005
Posts: 2,709 Likes: 7 |
First, I was able to receive inbound calls. I made some changes per advice I received and now I can make outbound calls, but now inbound goes to fail over number. There are so many things that can go wrong with SIP trunks. Since the provider is forwarding to a fail over number then it makes me think that either a) the provider doesn't see the SIP trunk registered b) the Toshiba is rejecting the incoming call, or c) the CIX didn't respond to an Invite message. If the call was immediately routed then I would guess a or b. If there was a delay then it could be c. Wireshark could help clear some of this up. Often the provider can see the SIP messages and should be able provide a little information. It may be good to learn how to run Wireshark properly. Sometimes the firewall can capture Ethernet packets.
|
|
|
|
Joined: Jan 2010
Posts: 937 Likes: 2
Moderator-Toshiba
|
Moderator-Toshiba
Joined: Jan 2010
Posts: 937 Likes: 2 |
What sort of SIP trunk service are you running? single DID username/password? a block of DID's with username/password? a block of DID's with IP authentication?
Are you able to do a Wireshark trace at the GIPU card?
Regards Carl
|
|
|
Forums84
Topics94,299
Posts638,872
Members49,770
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
109
guests, and
317
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|