|
|
|
|
Joined: Mar 2016
Posts: 34
Member
|
OP
Member
Joined: Mar 2016
Posts: 34 |
When I see pictures of this card, it seems it will fit in the slot.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Mar 2016
Posts: 34
Member
|
|
OP
Member
Joined: Mar 2016
Posts: 34 |
There are several on eBay..
But the price is just too high to pass customs.
Customs services in Norway are expensive.
Do you know other places to look for 4COP Cards?
|
|
|
|
|
Joined: Mar 2016
Posts: 34
Member
|
|
OP
Member
Joined: Mar 2016
Posts: 34 |
I just got lucky with my bidding. A card located in Florida is on its way  Hope I can use it
|
|
|
|
|
Joined: Mar 2016
Posts: 34
Member
|
|
OP
Member
Joined: Mar 2016
Posts: 34 |
I just got it connected, and the digital phone 201 started ringing immediately  I disconnected it and tried to make a call with one of the other phones, when choosing the trunk, the phone starts to call 500 Any ideas? How do I get a trunk dial tone?
|
|
|
|
|
Joined: Sep 2001
Posts: 2,330 Likes: 7
Moderator-Executone-Isoetec, Samsung
|
|
Moderator-Executone-Isoetec, Samsung
Joined: Sep 2001
Posts: 2,330 Likes: 7 |
A phone usually calls the 500 group when you dial 0 internally.Did you install the card?There is mmc 806 where you tell the system when you put a new card in it unless you default it or have the battery of for the ram card backup.Try that first and look again in mmc 724 and make sure that there are trunk port numbers assigned to the 4COP card.Those codes are what you can dial to access a trunk.If you haven't done any programming yet it's probably best to take out the BRI trunk card and default the system with the 4COP trunk card installed.
|
|
|
|
|
Joined: Mar 2016
Posts: 34
Member
|
|
OP
Member
Joined: Mar 2016
Posts: 34 |
Yes I installed tha 4COP card, the BRI card is out already.
If I turn off the battery RAM, will all programming be lost?
|
|
|
|
|
Joined: Mar 2016
Posts: 34
Member
|
|
OP
Member
Joined: Mar 2016
Posts: 34 |
It is only phone 201 that is ringing, and CALL1 and CALL2 is blinking red...
It says call for 500 in the display
If it helps resetting everything and turning battery off, i'll just do the programming over again
|
|
|
|
|
Joined: Mar 2016
Posts: 34
Member
|
|
OP
Member
Joined: Mar 2016
Posts: 34 |
I reset it, a bit eager here But it still does exactly the same. Seems there are incoming on Call1 and Call2
|
|
|
|
|
Joined: Sep 2001
Posts: 2,330 Likes: 7
Moderator-Executone-Isoetec, Samsung
|
|
Moderator-Executone-Isoetec, Samsung
Joined: Sep 2001
Posts: 2,330 Likes: 7 |
So what happens if you answer the call at 201? I don't know if the card would be North American and there would be a different European version?
|
|
|
|
|
Joined: Mar 2016
Posts: 34
Member
|
|
OP
Member
Joined: Mar 2016
Posts: 34 |
It looks like i answer the one line, and the other still blinks. . Silent in the handset. Our phone system has around 48 volts when standby.. I think it is the same..
|
|
|
|
Forums84
Topics94,291
Posts638,815
Members49,767
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
136
guests, and
424
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
