|
|
|
|
Joined: Dec 2005
Posts: 250
Member
|
OP
Member
Joined: Dec 2005
Posts: 250 |
When I call the number on the CTX28, the system rings normally and even shows the caller id. If the caller hangs up, the CTX28 stops ring briefly, but then rings again without the caller id a couple of times. Why does the CTX28 start back up ringing and how can I stop it?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jan 2010
Posts: 937 Likes: 2
Moderator-Toshiba
|
|
Moderator-Toshiba
Joined: Jan 2010
Posts: 937 Likes: 2 |
That's a new one to me.
Does it do it if you re-initialize the system and leave everything in default?
Try turning off the Caller ID for the PSTN trunks and see if it does it.
What happens if you have a test butt connected across the PSTN lines does that do the same thing?
Regards
Carl
|
|
|
|
|
Joined: Dec 2005
Posts: 250
Member
|
|
OP
Member
Joined: Dec 2005
Posts: 250 |
I have tried two out of the three. When I turn off caller id, the CTX28 rings normally and stops normally. When I plug in a standard phone, it rings normally and stops normally. I have not tried re-initializing the system.
|
|
|
|
|
Joined: Dec 2005
Posts: 250
Member
|
|
OP
Member
Joined: Dec 2005
Posts: 250 |
Re-initializing the system did not help either. I had the same problem. Do you think upgrading the system would help? I have version AR2.22 MH231.01.
|
|
|
|
Forums84
Topics94,306
Posts638,894
Members49,771
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (justbill),
57
guests, and
32
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
