|
|
Joined: Jul 2005
Posts: 126
Member
|
OP
Member
Joined: Jul 2005
Posts: 126 |
I have a Magix 4.0 with copper lines at the moment...I am about
to install a ATT IP Flex Reach PRI into the switch...
Has anybody in had any experience with the 100 DCD DS1 card..
any issues I should know about...
Also is there instruction sheet on installing this card.
Any help would be appreciated.
|
|
|
|
|
Joined: Dec 2005
Posts: 9,167 Likes: 8
Spam Hunter
|
|
Spam Hunter
Joined: Dec 2005
Posts: 9,167 Likes: 8 |
Moving topic to the Avaya forum.
I Love FEATURE 00
|
|
|
|
|
Joined: Jun 2001
Posts: 10,949
Moderator-Avaya
|
|
Moderator-Avaya
Joined: Jun 2001
Posts: 10,949 |
Just keep in mind that the Magix doesn't play nice with NI2.
Avaya SMB Authorized Business Partner. ACIS/APSS ESI Certified Reseller/Installer www.regal-comm.com
|
|
|
|
|
Joined: Jul 2005
Posts: 126
Member
|
|
OP
Member
Joined: Jul 2005
Posts: 126 |
Ok, I'll remember that, I still need to know is there any source
of documentation on what the PRI perimeters mean.I don't like adding an entry to a programming sequence and not what it means.
Also, one other question...how are fax and private lines are programmed once the PRI is installed...do they stay separate or
are they ported thru the PRI.
Thanks for the help.
|
|
|
|
|
Joined: Jul 2001
Posts: 3,346 Likes: 10
Moderator-Avaya-Lucent, Antique Tele
|
|
Moderator-Avaya-Lucent, Antique Tele
Joined: Jul 2001
Posts: 3,346 Likes: 10 |
I can link you to the easy step-by-step PRI programming sheet.
The private lines just become DNIS numbers on the PRI, so route them to the appropriate extensions.
I recall that AT&T's IP-Flex does NOT support faxes or modems, so keep them as copper. If they are using a traditional Adtran IAD, they can break them out as copper and still hand off the voice lines as PRI.
|
|
|
|
|
Joined: Jun 2001
Posts: 10,949
Moderator-Avaya
|
|
Moderator-Avaya
Joined: Jun 2001
Posts: 10,949 |
Around here when At&t rolls out IP flex to the customer they install a BIAB (Business in a box) which is nothing more than a SIP to analog converter.
Avaya SMB Authorized Business Partner. ACIS/APSS ESI Certified Reseller/Installer www.regal-comm.com
|
|
|
|
|
Joined: Jul 2005
Posts: 126
Member
|
|
OP
Member
Joined: Jul 2005
Posts: 126 |
Around here...Pasadena, Ca...ATT sells the IP Flexable Reach PRI..the Fiber is in the 1st fl main IMPOE room...my customer is on the 3rd floor....the customer has to get the ckts up to his suite...at his expense.
Thanks for all your input...I'm sure as I research this project.
I will have more questions...
|
|
|
|
|
Joined: May 2011
Posts: 391
Member
|
|
Member
Joined: May 2011
Posts: 391 |
AT&T will need to provide 5ESS as the PRI type. Your call handling will be different as you won't have lines with the ability to assign them to appearance buttons. No caller name, just number. Assign channels in descending order.
|
|
|
|
Forums84
Topics94,319
Posts638,938
Members49,777
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (morephones),
79
guests, and
39
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
