web statisticsweb stats

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Joined: Jul 2008
Posts: 3
Member
OP Offline
Member
Joined: Jul 2008
Posts: 3
I have a Tadiran system. This morning, I got a complaint that one of our fax lines gives a busy signal every time they try to send a fax. When I dial that extension from my phone, the caller ID display says "Locked Out." In the FEAT of the extension, it says:
HOT_ST_IMM DEST = 9
PRIVACY ASSIG
Any ideas what is causing this behavior?

Joined: Jul 2006
Posts: 728
Member
Offline
Member
Joined: Jul 2006
Posts: 728
Unplug the fax machine and then plug it back in.

Joined: Jul 2008
Posts: 3
Member
OP Offline
Member
Joined: Jul 2008
Posts: 3
Thanks for the reply - I did get it fixed last night. I finally got a chance to run down there with a phone, and found the port was completely dead. My cabling guy came out, and found the port was bad. We've had a bunch of strange issues regarding our phone switch, so I initially thought that was the cause.

Joined: Jul 2006
Posts: 728
Member
Offline
Member
Joined: Jul 2006
Posts: 728
Sounds like you have a good handle on things. Welcome to the board. If you have more questions about Tadiran, please don't hesitate to post. There are a lot of knowledgable people here. smile

Joined: Jul 2008
Posts: 3
Member
OP Offline
Member
Joined: Jul 2008
Posts: 3
Thanks... I'm going to need all the help I can get. I've worked on the data side for over a decade, but the voice stuff is fairly new to me.

Joined: Feb 2009
Posts: 1
Member
Offline
Member
Joined: Feb 2009
Posts: 1
This has happened to me two nights in a row, the only difference being that the fax machine works OK after it's unplugged and plugged back in. When we arrive in the morning the port is "locked out." Are there any causes other than a failing port? System has been in place almost two years, this just started happening a couple of days ago. Thanks!!

Joined: Feb 2006
Posts: 80
Member
Offline
Member
Joined: Feb 2006
Posts: 80
The most common way to get into "locked out" is to leave the handset off-hook for long time.
The same will be if you have a bad cable/wire with short between the 2 wires.
Check with another buttset or phone.
If you have no dial tone or noisy line check near PBX.


_ _ _ |_ _ _ |_ _ _ |_ _ _ |_ _ _ |_ _ _ |_ _ _ |_ _ _ |_ _ _ |_ _ _ |
__|_\m/__(-_-)___\m/|_ _ _ |_ _ _ |_ __ _ |_ _ _ |_ _ _ |_ _ _ |
_ _ _ |_ _ _ |_ _ _ |_ _ _ |_ _ _ |_ _ _ |_ _ _ |_ _ _ |_ _ _ |_ _ _ |

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,291
Posts638,815
Members49,767
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
212,404 Shoretel
189,160 CTX100 install
187,426 1a2 system
Newest Members
Robbks, A2A Networks, James D., Nadisale, andreww
49,767 Registered Users
Top Posters(30 Days)
Toner 26
teleco 6
dexman 5
jsaad 4
Who's Online Now
0 members (), 158 guests, and 430 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5