|
|
|
|
Joined: Apr 2001
Posts: 11
Member
|
OP
Member
Joined: Apr 2001
Posts: 11 |
I have an IDS 42 (4x8) system that has problems with sluggish lines. If a set accesses a CO line and hangs up within a few seconds after accessing it, the relay in the KSU will reset the line as usual but the system will still register the line as being in use. The only way to drop the line is to go into the system setup and reset the port. Is this a configuration or system malfunction?
Thanks.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Sep 2001
Posts: 2,330 Likes: 7
Moderator-Executone-Isoetec, Samsung
|
|
Moderator-Executone-Isoetec, Samsung
Joined: Sep 2001
Posts: 2,330 Likes: 7 |
There is an option on the M screen for this.
It is called Disable Auto Fault.This is designed so that if a trunk is accessed and not dialled,it removes the line from service assuming that the line is bad.The more you do it,it will remove the trunk for a longer period of time.Just turn the option off.
|
|
|
|
|
Joined: Apr 2001
Posts: 11
Member
|
|
OP
Member
Joined: Apr 2001
Posts: 11 |
That did the trick. Thanks!
|
|
|
|
Forums84
Topics94,322
Posts638,968
Members49,779
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
184
guests, and
67
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
