atcomsystems.ca/forum Forums TDM Business Telephone Systems Samsung Telephones & Systems Ring Plan Night

I get it! Its done, but with a little problem. Well how can i set up 2 messages at the AA, if i want to have a message at the ring plan 2, (additional to have a cell phone as operator) when the people calls, and the ring plan 2, is the default, its posible have a message, and then forward the call to a cell phone?

Yes, you need to program either the no act destination to goto an extension that has an external forward, or program to they can press 1 or something to goto the extension with the external forward.

Make sure icm ext fwd is turned on in mmc210

I have in the past created a group with one extension member. Enable all out of group feature and set the next destination of the group as the virtual extension with the forward to mobile set.
you then use the in/out group code to log the extension out of the group and ... hay presto a work around.
Then when you set the operator group 0 in MMC600 for the night RP it diverts straight to the mobile.

I had the same problem and it was solved by removing the extension that is programmed with the FWRD5 button from any station group or any other type of group. Check also if you have LCR configured not to put this extra digit at the MMC that defines the trunk and the external number. Also play a little with no ans fwd delay timer.

Hoe it helps. It worked for me.