|
|
Joined: Aug 2006
Posts: 98
Member
|
OP
Member
Joined: Aug 2006
Posts: 98 |
I know this subject has been talked about before and I have read them all.
However I'm have a problem with a new install OS7100 on one side and an OS 7200 on the other. Systems are licensed with SPNET and the 7200 is using an OAS card which is set to MGI only. Systems are on a VPN therefore there should be no issues with opening ports. routing tables have been created and DID tables also.
It not like I haven't set one up before since I have another customer with four sites and everything works fine. Any ideas?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jun 2005
Posts: 574
Member
|
|
Member
Joined: Jun 2005
Posts: 574 |
Can you ping each sites i would try first
also can you dial long handed between sites if you can it would seem you have problems with your lcr and ddi
|
|
|
|
|
Joined: Aug 2006
Posts: 98
Member
|
|
OP
Member
Joined: Aug 2006
Posts: 98 |
Yes I can ping each site and no I can not dial the site long dial. I have also relooked the LCR and DID and compared it to other sites that I have installed that work. So I'm still looking for some help.
|
|
|
|
|
Joined: Jun 2006
Posts: 3,004 Likes: 4
Moderator-Samsung
|
|
Moderator-Samsung
Joined: Jun 2006
Posts: 3,004 Likes: 4 |
If you can't dial long hand, then check your programming.
If you want to send me the db'ss i can have a look
|
|
|
|
|
Joined: Aug 2006
Posts: 98
Member
|
|
OP
Member
Joined: Aug 2006
Posts: 98 |
Okay Ill get that out later today.
|
|
|
|
|
Joined: Aug 2006
Posts: 98
Member
|
|
OP
Member
Joined: Aug 2006
Posts: 98 |
Okay Ill get that out later today.
|
|
|
|
|
Joined: Oct 2007
Posts: 46
Member
|
|
Member
Joined: Oct 2007
Posts: 46 |
If you're on a private network (VPN), then check MMC 838. You need to list all the private IP addresses that are not on the subnet but which are still 'considered' local. You'll need to do this at both sites.
|
|
|
|
|
Joined: Jun 2006
Posts: 3,004 Likes: 4
Moderator-Samsung
|
|
Moderator-Samsung
Joined: Jun 2006
Posts: 3,004 Likes: 4 |
|
|
|
|
|
Joined: Aug 2006
Posts: 98
Member
|
|
OP
Member
Joined: Aug 2006
Posts: 98 |
I would like to thank nameless for looking over the db'ss for me. It is suprising how a new set of eyes can pick out something as simple as one number in an IP address that can keep it from working. I had looked at it at least 50 times and just did not see it. I this site more then I do Samsung tech support, because I get so many good suggestions. Again I would like to thank everyone for there input and thanks again to nameless.
|
|
|
|
Forums84
Topics94,319
Posts638,940
Members49,778
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (morephones),
101
guests, and
56
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
