|
|
|
|
Joined: Nov 2003
Posts: 6
Member
|
OP
Member
Joined: Nov 2003
Posts: 6 |
You guys did real well on the last one, so here's another one for you:
What would cause a station to have no indicator lights working? ie, all buttons work, but no lights come on. I think I may have caused this problem when I was trying to fix something else.
Also, how would one go about resetting the terminal password on an executech 2000 system?
thanks again!
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Mar 2001
Posts: 7,350
RIP Admin
|
|
RIP Admin
Joined: Mar 2001
Posts: 7,350 |
Unplug the phone and then while you are plugging it back in press and hold down the MUTE button and it will go through a self test, release the Mute button as soon as the test starts. If all the lights seem to be working then it's in the station cos programming.
When you say Terminal programming are you referring to VDT on site or remote by modem?
So I take it that you got the other problem fixed?
[This message has been edited by dtmf (edited November 26, 2003).]
Russ runs a local service and private tech center. ![[Linked Image from sundance-communications.com]](https://www.sundance-communications.com/installers/logos/65graphic.jpg) [/url]
|
|
|
|
Forums84
Topics94,300
Posts638,879
Members49,770
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
148
guests, and
393
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
