|
|
Joined: Jun 2001
Posts: 10,631
RIP Admin-Founder
|
RIP Admin-Founder
Joined: Jun 2001
Posts: 10,631 |
It's either you pay me now or you pay me later. probally both
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Apr 2002
Posts: 43
Member
|
Member
Joined: Apr 2002
Posts: 43 |
I have a whole building with runs ranging from 50 to over 500 feet of Plentum cat5 not even cat 5e and have had no complaints whatsoever. I am not sure what kind of data or how much they send, but it has been working like this for 4 years. It was my first data job and everything was home run. I use only allen-tel products. At the time, i never gave distance a second thought. (WHEW!! dang lucky i guess)The only thing I tested was for shorts and opens and crossed pairs. HMMMM.... Brad
The only dumb question is the one you don’t ask as that is the question that can make or break you. Brad
|
|
|
|
Joined: May 2002
Posts: 1
Member
|
Member
Joined: May 2002
Posts: 1 |
OK folks - It looks as if no one here seems to know WHY the spec is 330 ft. It has to do NOT with signal degredatiuon so much as with the timing used in the collision avoidance for ethernet. The further the run, the longer signal takes to get from point A to point B. That means there can be to long a gap between the time of the start of transmission and the time the signal is heard on the other end. If the other end tries to transmit during the gap, since it doesn't hear anyhting on the wire... bang! both packets interfere with each other and get trashed. You have a collision. You can go WAY over 330 ft in many cases, but if you are not using a switch, you will get a LOT of collisions. That is of course a moot point if you are using a switch - I've seen 700ft runs off switches that had NO problems at all when I slapped a sniffer on and looked for errors. Depends on the signal strength the devices (on BOTH ends) put out and the quality of the cable - the lower the attenuation the longer ya can go.
Then again, I have also seen 100mbs ethernet run over a 50ft cable run of silver satin (ie: flat, non twisted pair cable) with not ALL that many errors. :-)
|
|
|
Forums84
Topics94,306
Posts638,894
Members49,771
|
Most Online5,661 May 23rd, 2018
|
|
1 members (justbill),
84
guests, and
31
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|