|
|
Joined: Mar 2002
Posts: 179
Member
|
OP
Member
Joined: Mar 2002
Posts: 179 |
Damnest thing!, I have a 128k connection to the internet over the last two channels of my T1. I switched out my Adtran for a Paradyne 3164, Voice works great but cannot get the internet to work. I have configure the PRT1 to NET and used BLOCK to assign the last two channels to PRT1. Still oes not want to kick in. any ideas?????
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: May 2002
Posts: 17,722 Likes: 18
Member
|
|
Member
Joined: May 2002
Posts: 17,722 Likes: 18 |
Don't know if this will help. It has on line user manuals for Paradyne CSU/DSU. www.paradyne.com/products/3160_64_data_sheet.html Bill
Retired phone dude
|
|
|
|
|
Joined: Mar 2002
Posts: 3,630
Moderator-Avaya, Nortel
|
|
Moderator-Avaya, Nortel
Joined: Mar 2002
Posts: 3,630 |
did you configure the last two channels as Data?
|
|
|
|
|
Joined: Mar 2001
Posts: 7,350
RIP Admin
|
|
RIP Admin
Joined: Mar 2001
Posts: 7,350 |
I agree, make sure you have the last two channels configured right.
Russ runs a local service and private tech center. ![[Linked Image from sundance-communications.com]](https://www.sundance-communications.com/installers/logos/65graphic.jpg) [/url]
|
|
|
|
|
Joined: Mar 2002
Posts: 179
Member
|
|
OP
Member
Joined: Mar 2002
Posts: 179 |
I have done that, I have set the PRT1 to NET and configured the last two channels to Data. I have used two different DSU's. I can't believe there both bad. I must be missing a setting from the Adtran.
|
|
|
|
|
Joined: Mar 2002
Posts: 3,630
Moderator-Avaya, Nortel
|
|
Moderator-Avaya, Nortel
Joined: Mar 2002
Posts: 3,630 |
What about the port rate on the channels? clocking? Did you change the LED indicators to display Data? It might tell you what you are getting for errors. Also, the cable that comes from the Data port is a propiatary cable, so you might want to check and make sure you have the right one.
|
|
|
|
|
Joined: Mar 2002
Posts: 179
Member
|
|
OP
Member
Joined: Mar 2002
Posts: 179 |
I reset it to factory and then programmed frorm scratch, came right up!.
Thanks All!
|
|
|
|
Forums84
Topics94,294
Posts638,834
Members49,769
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
118
guests, and
330
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
