atcomsystems.ca/forum Forums Other TDM Phone Systems Telrad Telephones & Systems What is the Feature Code for VMTrnsfr?

...On a Telrad Digital 128 SB6.05?

And for some reason, phones added beyond 44 will not apply the same map as the first group. Can someone tell me what has to be done to set up speed table 2 to be exactly the same contents as speed table 1? Does this affect the map applied to the phones?

The Map type has to do with the Phone Type
SD map for BA2,SD1,SD2. BA map for BA1 phones. EX1 map for executive phone with 2x24 display. EXD map for exec phone with 8x24 or no display. If you have the same type phones you can have 96 of the same map. But remember there are only 39 different map types. As far as speed dial table 2 to be exectly the same, start typing these will have to be manually entered. How many speedials did you give to each phone? And how many do you need for system spped dial?

I forgot there is no feature code for VMXfer you can use a personal speed dial key on the phone. Program the speedial key with Xfer vm hunt group DN.

All the phones are set the same...

left bank - FL,FL,FL,FL,VM,VMTrsfr
Right bank- Record,and 5 one touch SPD Dials

I assume you are looking at the labels on the phones. The MAP in station programming will have FL for a float key and the VM could be voice massage or maybe voicemail and the VMTrsfr is a speeddial or a memory key but usually a speeddial key.