how to tell what port a station is on|Sundance Business VOIP Telephone Help

Print Thread

Rate Thread

Page 2 of 2

Re: how to tell what port a station is on #150273 02/07/12 11:51 AM
Joined: Jan 2008 Posts: 148 Buffalo, NY, USA igadget OP Member
OP igadget Member Joined: Jan 2008 Posts: 148 Buffalo, NY, USA	Quote Originally posted by peiphoneguy: QUOTE Who ever replaced it with the norstar saved the customer bucks by reusing what was already in the walls. I had not considered that, color me corrected. I may have poorly suppressed annoyance at the cable because it often clogs cable paths I want to use. of course sometimes I get to recycle it and then I don't feel so bad. About me: 8 years of network support 7 years IT field service Always looking for the next project to be done.

Nortel Phone System Service

Nortel Phone System Service in Canada

Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.

Re: how to tell what port a station is on #150274 02/08/12 04:14 AM
Joined: Feb 2005 Posts: 1,615 Toronto, Canada Curlycord Member
Curlycord Member Joined: Feb 2005 Posts: 1,615 Toronto, Canada	This seems so complicated with near Shakespearism for relocating 2 bloody sets. Hire a Telephone tech lol. =---()))))))))---= www.curlycord.com Toronto, Canada

Re: how to tell what port a station is on #150275 02/08/12 07:35 AM
Joined: Apr 2007 Posts: 894 quebec canada soyons-expositifs Member
soyons-expositifs Member Joined: Apr 2007 Posts: 894 quebec canada	a site visit with a toner probe and punch down tool and these sets would have been moved before the first post was answered... Jay, a recovering IT guy

Re: how to tell what port a station is on #150276 02/08/12 05:36 PM
Joined: Jan 2009 Posts: 851 Likes: 1 Nebraska ffej010 Member
ffej010 Member Joined: Jan 2009 Posts: 851 Likes: 1 Nebraska	What Jay said.

Re: how to tell what port a station is on #150277 02/09/12 12:36 AM
Joined: Jun 2006 Posts: 8,732 Likes: 2 Cookshire-Eaton MooreTel Moderator-Nortel, Computers, General
MooreTel Moderator-Nortel, Computers, General Joined: Jun 2006 Posts: 8,732 Likes: 2 Cookshire-Eaton	I also have to agree. You're going to need to send a tech in anyway to do the transfer and whatever your "notes" say could very well be outdated by that time. I suppose your "notes" also indicate where in the building is "Ext xxx" like "2nd floor, 3rd door on the right, 4th desk on the left". I didn't think so. The tech has to physically find the extension phone to verify it's the one to move, it's not in use, & the same for the "new" port, so while there he checks the port. So what's the big deal? Nowhere to a trained TELEPHONE tech. Scientists say that the universe is made up of Protons, Neutron & Electrons. They forgot "Morons". Dave. (CTUB) Canadian Techs Use Bix!

Page 2 of 2

Moderated by MooreTel

Hop To

Link Copied to Clipboard

atcomsystems.ca/forum Forums TDM Business Telephone Systems Nortel Telephones & Systems how to tell what port a station is on