|
|
|
|
Joined: Jan 2009
Posts: 851 Likes: 1
Member
|
OP
Member
Joined: Jan 2009
Posts: 851 Likes: 1 |
Working on a MICS that has Release 1 T1 software cartridge in it. It also has one trunk module and one station module added to it as well. This customer wants to add caller ID to the system. All of the cards in the system are CI trunk cards, but from what I read this software version does not support caller ID. I do have a 7.1 software lying around but am not sure on the upgrade process. What is the proper upgrade path to get to 7.1 from this current release? I would like to keep current programming intact if possible rather than wiping out and starting from scratch. Thanks.
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Jun 2005
Posts: 2,256
Member
|
|
Member
Joined: Jun 2005
Posts: 2,256 |
That's going to be a lot of upgrading. I think you would have an easier time just starting from scratch and reprogramming.
|
|
|
|
|
Joined: Mar 2002
Posts: 3,630
Moderator-Avaya, Nortel
|
|
Moderator-Avaya, Nortel
Joined: Mar 2002
Posts: 3,630 |
I second the start from scratch. It will save you the wasted time of an attempted upgrade migration and a corrupt database.
|
|
|
|
|
Joined: Jan 2009
Posts: 851 Likes: 1
Member
|
|
OP
Member
Joined: Jan 2009
Posts: 851 Likes: 1 |
After weighing the pros and cons, I think a do-over from scratch may be the best solution as well. Thanks for all the input.
|
|
|
|
Forums84
Topics94,305
Posts638,892
Members49,770
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (Andyreed),
143
guests, and
32
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
