TTT

Thanks for your response

What’s kind of strange is when I had both legs tied together I was getting the same reading as the one leg that had the 30 ohms

I definitely think there’s something wrong with the amp

I also noticed that the second and third floor are getting tied to the amp from a pair of wires from a voice feed
I should be able to correct this

The amplifier used to be at the other end of that voice feed. They moved it downstairs at some point.

Any recommendations on what amplifier I should be looking at?
I think TOA makes 250 W amplifier and that’s as high as it goes but I’m not sure

I’m assuming with the new amplifier providing everything looks OK those speakers can all get tapped down to 1.25 W and will be able to add more speakers because it seems like there is a few dead spots


Thanks

JD