OK I am back out in the field in a different building. I have a TOA. 240 amplifier.
I just did an impedance test and it registers 20 ohms at 1X
So that looks like it’s using 245 W
Also the master volume and the input 1 are cranked up to 10
I’m sure if there’s a few speakers here that are tap higher than normal
When they switched over from the NEC to the Hosted team’s phone system using the Algo, 8301
The volume was really low so I believe they might have went around and tapped up some of the speakers in certain areas. Not realizing that this is probably something they shouldn’t have done.
Also, the page used to come through the NEC phones now it does not come through the new phones
The only reason that I’m working on this project is because they received some grant money, and they wanted to add some external Paging horns to the outside of the building
I think they currently have one Paging horn Bogen 15watt tapped that 7.5.
They want to add three additional Paging horns to each building, so my first thought was that could be a problem
I think I’m gonna try to hook up a Valcom Paging speaker and see how that works
Keep in mind this is a School so it can get loud in certain areas with the kids
Thanks
JD
