|
|
|
|
Joined: Mar 2009
Posts: 29
Member
|
OP
Member
Joined: Mar 2009
Posts: 29 |
Im curious if anyone has a SV8100 setup on a customers Network like described below.
When an IP Phone is plugged into the customers network it goes to their DHCP server and gets an IP address on the data VLAN..this IP points them to a FTP server with a config file on it. The phone downloads the config file then reboots...when it reboots it searches for DHCP in the Voice VLAN on the same DHCP server...it is assigned the correct scope of IP address and comes up.
Ive got all this working except for when the phone reboots it never gets the second IP address but times out saying DHCP server not found.
Can anyone point me in the right direction?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Forums84
Topics94,306
Posts638,894
Members49,771
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (justbill),
70
guests, and
29
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
