I have a client with a BCM50 installed in a home based business. Three CO lines, 2 for business on a rotary, and 1 private line.

We want to configure the VM so the AA answers the 2 business lines after 4 rings and ultimately going to a single mailbox, while the private line after 4 rings forwarding on no answer to a separate, personal mailbox apart from the business. Any advice on the best way to do this?

Business lines can be taken care of by the GD mailbox if using it. If not, same as for the Private line below.

Private line does not get answered by the AA, but configure the set for CFNA to number of rings desired,then send it to the DN of the CP.

Thanks for the advice, I appreciate it.