Have 124i with an lapbu programming via PC Program. I know that the lapbu on the 28i has a cord that comes off of it but to use the PC Program you have to also have a DCI unit correct?

Thanks,
Daniel

No.

Bothe the newer LABU (the one with the RS232)for the 124i and the 28i LAPBU use the same cable. One cable is angled for the cabinet to close but the pinut is the same. The old LAPBU for the 124i does not have a RS232 port on it and does require a DCI unit.

Bill,
Would you by any chance have the model number for the one with the RS232 port on it

Thanks,
Daniel

Would this happen to be the one that has the RS232 on it

Click Here

Thanks,
Daniel