We bought a replacement drive in 2014, never had to install it. Until probably now.

There's a major alarm:

"Check condition scsi uncorrectable data error" hard 1 soft 0
"Check condition scsi data address mark not found" hard 10 soft 0

The original dealer in the valley no longer seems to service legacy
systems, and has abandoned us.

I have the moss sheet, a bunch of system rsd's and a recent data save.

Anyone in the L.A. area still servicing long past EOL SX2000's?
-- not expecting a freebie, we'll pay for the service.

Thank you,
Dave

Follow up... I tried to make an rsd copy of the hard disk, which failed, now the system is acting peculiar, and cde crashes.

I have an rsd labeled
sx.q40.12.5
lw29 rls 3 ur5
volume q40125fd

and a recent data save (which completed).

I have to reboot the non redundant system, if it doesn't come back up, I've read and reread the tech handbook and I'm still a bit confused, could someone let me know how to install a new winchester (9400-300-306-NA) restore from the system disk and data saves.

Hopefully, these are the only 2 rsd's I'll need!

Thank you in advance,
Dave

Finally gave up trying to find someone to service the system and decided to swap the main cab with a 3300. Got a really good deal from a Mitel dealer in PA. Thx Fred!

Guessing Fred Moore