atcomsystems.ca/forum
ATT Partner System. Looking for information installing wireless extension to Partner system.
Other phones on site are Partner 18 phones. Cabinet says M103C3 on it. Can a wireless extension be added. If so what is the phone type and does it just connect to one of the digital extensions in the system.
Tks
mc601
If your talking about a cordless single line set then yes, your middle card will tell you what system you have not the cabinet.
You can put a TransTalk cordless phone on the Partner as well. The extensions are actually considered analog extensions, not digital. A member of this board, usedphones.com sells the TransTalk wireless phones.
Was doing some research on line and seems like a 9310 phone is cordless and connects to one of the station ports.
The cabinet is a small unit that looked to have 2 flat cabinets attached to each other. Will return next Friday to see if I can find more information on the system.

Tks
mc601
I would use the en-genius product if it where me
Quote
Originally posted by Z-man:
You can put a TransTalk cordless phone on the Partner as well. The extensions are actually considered analog extensions, not digital.
A TransTalk on the Partner ACS WILL require the DIGITAL side of the port to work.

And I also agree with Skip, if you are looking for a nice long range analog cordless, than you can't beat an Engenius.
Transtalk=headache. Go with the Engenius. I've had to replace hundreds of transtalks, literally. Poor range, static, overall poor performance.
Engenius. Super damn expensive, but there really is no competitor in this area.

And on that note, DO NOT BUY FROM AN UNAUTHORIZED SOURCE. If you do and the phone fails, you will have absolutely no recourse with Engenius.
© Sundance Business VOIP Telephone Help