I have a clinet that has the above model. they want the system to allow audiable ringing over thei Bogen TPU-60B amp/horns in shop.
I am not an Iwatsu person but work with Toshiba.
their installing company is long gone.
Can someone help program an analog port? I found analog dialtone on the blocks, I beleive port 211, it rings when called from a digital port. and vis versa, so it is open and analog appears off their card.
They have 4 CO lines that ring all digital phones and want to hear ringing on their paging horns. I am not sure how to program this port to ring. Bogen tech support confirmed with me since there is not a cross-connect from the analog port of the PBX to TEL RING on the amp that is why it is not ringing at all.

You have to program the port to ring in programming class 11, item 32. There are settings for day and night, so set the appropriate values for each.

Hello sir, I appriciate your reply to assit me. My problem is I dont have a program manual or how to get into programming mode. Can you offer assistance? I assume that this could be done from a particualr phone set rather than using Iwatsu software and a laptop.

PM Sent

Axiom Solutions, my advice would be to contact JBean3329 via PM or e-mail and tell him what you need done.
JBean is a highly qualified Iwatsu professional and can help you with any assistance you need on this system.

But!
Please be willing to pay for his expertise.