Hi

Nearly there with the setup but the SIP provider requires extra 0 to be dial with any number for example on a local number

The local number is 01 4568154 for me to dial this number I have to dial 001 4568154,

I would prefer to just dial 4568154 for local number droping the 001 and for outside say the Dublin county they have to dial the area code plus the number eg 045 9028134 not 0045 9028134


Any help would be appreciated....I understand this has to do with number routing which I have done on the Panasonic

Michael

And the system we are talking about is?????

Just assuming this is either an SL1100, SL2100, SV8100 or SV9100 then you need to use F-route programming (Memory Block 44-xx)! SV8300 or SV9300 then this is achieved in LCR programming Command 8A. I'm not even going to try to get there for SV8500 or SV9500!