anyone had a Electra Pro II have ext showing different ext numbers after system shut down ?
Only if the numbering plan had been changed, system lost power and the memory battery was dead. System would reboot as default.
If the system reboot default will the T-1 still work because it is up,I am going to check card assignment.
Is that memory battery a common pc battery?
it should be a 3.6 volt nicad battery if i am not mistaken. it is on the CPU.
Is it soldered in or can it be replaced fairly easy?
It is soldered on, it can be replaced but usually takes 30-45 minutes to take the board out de-solder the existing battery and install the new battery.
just call them and tell them what you need. they know.
as for taking the board out....it's a card...should slide right out. 2 seconds.
soldering......10 minutes if you've done it before or 20 minutes if not. not rocket science.
(in my best homer voice) mmmmmmm.....molten metal