Would like to setup ACTU page output - 01/24/07 07:21 PM
I have CIX-100 with mostly DKT3000's. I can page all the phones.
I recently installed a sound system (a Speco PMM-120A PA amplifier)
The amplifier has a 600 ohm telephone paging input (with 3 lines; 'G,' 'Com,' and 'Hot').
The amp also has 'input level' and 'VOX Sens' adjustment dials.
Great! Now I should be able to broadcast the CIX page output over the loud speakers.
WIRED CONNECTION....
I connected the CIX-100, 600 ohm page output to the amplifier telephone paging input 'Com' and 'Hot' inputs.
LEVEL SETTINGS....
On the CIX I turned the page output trimpot all the way clockwise.
On the amp, I set the input level and VOX Sens to mid range.
I am playing background music on the PA, when I 'page all,' the music keeps on playing and I only hear the page from the telephone speakers.
so, what am I missing?
is there perhaps a setting for the CIX to enable the page output?
does the page output need to be added to the page all group with eManager?
Or perhaps I made some mistake with my configuration?
I recently installed a sound system (a Speco PMM-120A PA amplifier)
The amplifier has a 600 ohm telephone paging input (with 3 lines; 'G,' 'Com,' and 'Hot').
The amp also has 'input level' and 'VOX Sens' adjustment dials.
Great! Now I should be able to broadcast the CIX page output over the loud speakers.
WIRED CONNECTION....
I connected the CIX-100, 600 ohm page output to the amplifier telephone paging input 'Com' and 'Hot' inputs.
LEVEL SETTINGS....
On the CIX I turned the page output trimpot all the way clockwise.
On the amp, I set the input level and VOX Sens to mid range.
I am playing background music on the PA, when I 'page all,' the music keeps on playing and I only hear the page from the telephone speakers.
so, what am I missing?
is there perhaps a setting for the CIX to enable the page output?
does the page output need to be added to the page all group with eManager?
Or perhaps I made some mistake with my configuration?