|
|
|
|
Joined: Jul 2023
Posts: 1
Member
|
OP
Member
Joined: Jul 2023
Posts: 1 |
We have several 9751 Mod 10's that don't pop up with the banner when we connect. We've tried reseating the SMIOC cards.
In one location we replaced it, still without luck. Has anyone had to replace the SMIOC interconnect panel?
Better question: is there anyone out there besides me supporting these?
Thanks.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Apr 2005
Posts: 290 Likes: 1
Member
|
|
Member
Joined: Apr 2005
Posts: 290 Likes: 1 |
I worked on them years ago. I'd guess the hard drives are ok if they've been turned off/on, or restarted. I can't recall any no header situations when I worked for Rolm on the 9751s (did with 8000s) unless the hard drive was n/g, but I think we'd at least see a prompt to insert the CNFG diskettes.
I do recall if the serial output paused during a session, Ctrl-Q (opposite of Ctrl-S) would sometimes 'unpause' the output.
|
|
|
|
Forums84
Topics94,291
Posts638,815
Members49,767
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
|
|
