|
|
|
|
Joined: Dec 2010
Posts: 11
Member
|
OP
Member
Joined: Dec 2010
Posts: 11 |
Hello All,
We have a CIX 100 with 3 cards Slot 1 BDKU Slot 2 RSTU 8 port Slo3 RCOU/RCOS 8 port. If I replace the RCOU/RCOS with RCIU/RCIS cards will caller ID work also are there any setting that will need to be changed in the emanager? The phone company has enabled caller ID. I really appreciate any help provided.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jun 2005
Posts: 2,709 Likes: 7
Member
|
|
Member
Joined: Jun 2005
Posts: 2,709 Likes: 7 |
You need both the RCIU and the RCOU cards in the same system, and the CO lines connected to both cards at the same time. Since nothing in the Toshiba system is plug and play, the RCIU will need to be programmed.
There is a BCOCIU card that is like both cards in one slot, but this requires a newer processor, ACTU3A.
If you don't have room in the main cabinet for both the RCOU and RCIU cards, then you would need an expansion cabinet.
Last edited by newtecky; 03/20/23 11:17 PM.
|
|
|
|
Forums84
Topics94,305
Posts638,893
Members49,771
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
97
guests, and
36
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
