1A2 KSU ringer question|Sundance Business VOIP Telephone Help

Print Thread

Rate Thread

Page 2 of 2

Re: 1A2 KSU ringer question Pat Broome #631091 07/12/19 11:03 AM
Joined: Dec 2007 Posts: 6,799 Likes: 18 Canby, Oregon Professor Shadow Retired Admin
Professor Shadow Retired Admin Joined: Dec 2007 Posts: 6,799 Likes: 18 Canby, Oregon	It seems like the factory setting on the line cards would work without any modifications (400E's), but I do remember having to change one, but I don't remember the reason...probably to accommodate MOH. Do you have BSP's for line cards? Here is one for the E for your viewing pleasure. Dean Photographs: https://www.instagram.com/deanwilsoncanby/ https://fstoppers.com/profile/deanwilsoncanby https://www.facebook.com/Dean-Wilson-Photography-112841337020414 Please don't confuse your "Internet Search" with my licenses, certifications and over 30 years experience. "Thank you for calling Technical Support. If you feel you have reached this number in error, please hang up and press redial."

Atcom VoIP Phones

Best VoIP Phones Canada

Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Re: 1A2 KSU ringer question Professor Shadow #631104 07/12/19 03:54 PM
Joined: Jul 2019 Posts: 5 Wayne Pat Broome OP Member
OP Pat Broome Member Joined: Jul 2019 Posts: 5 Wayne	Got it. After pulling my hair out for hours, I went back to basics. I changed the 20VAC fuse (which appeared to be good) and now I'm getting about 17V at B1/R1. Any recommendations on a good low voltage buzzer until I get a ring generator? Thank you so much for you help!

Re: 1A2 KSU ringer question Pat Broome #631106 07/12/19 04:13 PM
Joined: Dec 2007 Posts: 6,799 Likes: 18 Canby, Oregon Professor Shadow Retired Admin
Professor Shadow Retired Admin Joined: Dec 2007 Posts: 6,799 Likes: 18 Canby, Oregon	The ol' intercom buzzers and of course the newer ones with volume control. Dean Photographs: https://www.instagram.com/deanwilsoncanby/ https://fstoppers.com/profile/deanwilsoncanby https://www.facebook.com/Dean-Wilson-Photography-112841337020414 Please don't confuse your "Internet Search" with my licenses, certifications and over 30 years experience. "Thank you for calling Technical Support. If you feel you have reached this number in error, please hang up and press redial."

Re: 1A2 KSU ringer question Pat Broome #631109 07/12/19 06:24 PM
Joined: May 2007 Posts: 5,058 Likes: 5 NYC Silversam Moderator-1A2, Cabling
Silversam Moderator-1A2, Cabling Joined: May 2007 Posts: 5,058 Likes: 5 NYC	Any of the little buzzers with the WHITE wiring. (The ones with the blue wiring are for 10VAC) Sam "Where are we going and why are we in this hand basket?"

Re: 1A2 KSU ringer question Pat Broome #631110 07/12/19 06:41 PM
Joined: Jul 2006 Posts: 2,717 Likes: 11 Candlewood Lake OH Carl Navarro Admin
Carl Navarro Admin Joined: Jul 2006 Posts: 2,717 Likes: 11 Candlewood Lake OH	In our part of the world, buzzers came in 3 flavors: SE-8A,8B, and 8X. A's were 6-10vac, B's were 10-40vac, and X's were for 90-140vac 20-60 Hz. The wires were blue, red, and black. Carl

Re: 1A2 KSU ringer question Pat Broome #631122 07/13/19 06:50 AM
Joined: May 2007 Posts: 5,058 Likes: 5 NYC Silversam Moderator-1A2, Cabling
Silversam Moderator-1A2, Cabling Joined: May 2007 Posts: 5,058 Likes: 5 NYC	What Carl said. Except around here the Red wires were white. I'd forgotten about the High voltage buzzers..... Sam "Where are we going and why are we in this hand basket?"

Page 2 of 2

Moderated by ChrisRR, EV607797, Silversam

Hop To

Link Copied to Clipboard

atcomsystems.ca/forum Forums Other TDM Phone Systems 1A2 and Comkey Telephones & Systems 1A2 KSU ringer question