|
|
Joined: Sep 2006
Posts: 169
Member
|
OP
Member
Joined: Sep 2006
Posts: 169 |
No cost increases, the wiring and new routers were already planned. I was doing them either way.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Mar 2007
Posts: 352
Member
|
|
Member
Joined: Mar 2007
Posts: 352 |
I was doing a voice line call repair at u-haul the other day for a alarm. The phones are Cisco VoIP. The echo was really bad. So much for good quality product that was installed poorly.
|
|
|
|
|
Joined: May 2002
Posts: 4,302 Likes: 7
Moderator-Avaya, Polycom
|
|
Moderator-Avaya, Polycom
Joined: May 2002
Posts: 4,302 Likes: 7 |
Just wondering, how is it working out....
|
|
|
|
|
Joined: Sep 2006
Posts: 169
Member
|
|
OP
Member
Joined: Sep 2006
Posts: 169 |
Well all the network stuff is complete, but the phone system roll out starts on the 18th.
I have the tech onsite for 2 days to get all the config setup and for some testing.
I took this week off knowing I will be in for some long days/nights in the coming weeks!
|
|
|
|
|
Joined: Dec 2002
Posts: 9,424 Likes: 1
Member
|
|
Member
Joined: Dec 2002
Posts: 9,424 Likes: 1 |
I am doing a cutover tonight at work...100 phones on a Cisco Business Edition 6000, running on 2 servers.
So far so good, our CDW guy has been great. We have tested everything thoroughly including a soft cut of the PRI after hours.
They have a feature called ETAPS. The phones are all programmed into Call Manager, I just plug the phone in, set the extension, and it resets.
Jeff Moss
Moss Communications
Computer Repair-Networking-Cabling
MBSWWYPBX, JGAE
|
|
|
|
|
Joined: Sep 2006
Posts: 169
Member
|
|
OP
Member
Joined: Sep 2006
Posts: 169 |
Thats great to hear. I have 70 phones, but spread over 11 locations. So I am hoping things are that nice that once I program them they will pick things up once I move them to their permanent home!
I will try and keep things updated as I go.
|
|
|
|
|
Joined: Dec 2002
Posts: 9,424 Likes: 1
Member
|
|
Member
Joined: Dec 2002
Posts: 9,424 Likes: 1 |
We have 2 at a small branch office connected by a P2P T1. Programmed them here, went to the branch and plugged them in, crystal clear!!
Jeff Moss
Moss Communications
Computer Repair-Networking-Cabling
MBSWWYPBX, JGAE
|
|
|
|
|
Joined: Mar 2006
Posts: 328
Member
|
|
Member
Joined: Mar 2006
Posts: 328 |
Originally posted by jeffmoss26:
We have 2 at a small branch office connected by a P2P T1. Programmed them here, went to the branch and plugged them in, crystal clear!! That's a best case scenario install. With a point to point T1 then you're using a proven, traditional telco circuit with low, consistent latency and telco-grade uptime. I would hope they would be clear...
|
|
|
|
Forums84
Topics94,303
Posts638,889
Members49,770
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
