web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Joined: Jan 2012
Posts: 1
Bamya Offline OP
Member
OP Offline
Member
Joined: Jan 2012
Posts: 1
i own a 3com NBX V3000 and I have been with the same telco carrier for the past 5 years. This year I decided to change to AT&T since they offered me a better deal. Last week was the turn up. All numbers and DID's were ported so I assumed there would be nothing that I need to change in the phone system/dial plan. Well apparently I was wrong. After the port the phones no longer rings with the main # is called. Instead the auto attendant answers. When calling all other DID's, the calls bypass the auto attendant and ring on the necessary phones. My question is how do I bypass the attendants when the main phone number is called and have all the phones in the hunt group ring just like all the DID's. Anyone's assistance is greatly appreciated.

I also posted this on the HP support forums See link below.

https://h30499.www3.hp.com/t5/NBX/3com-NBX-V3000-Call-routing-issue/td-p/5428723

Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Joined: Oct 2006
Posts: 85
Member
Offline
Member
Joined: Oct 2006
Posts: 85
In looking at your dialplan it looks like you are just looking for 4 digits in the dial plan. You could change the table to accomodate more digits in the last table it says:

PreTranslator Create 1 4Digit DDI 3Digit Internal
/ PreTransId Entry Digits
/ ---------- ----- ------
PreTranslatorEntry Create 1 1 1
PreTranslatorEntry Create 1 2 2
PreTranslatorEntry Create 1 3 3


You could change these so that it spells out the DID numbers to accomodate the carrier. You could change as follows:

PreTranslator Create 1 7Digit DDI 3Digit Internal
/ PreTransId Entry Digits
/ ---------- ----- ------
PreTranslatorEntry Create 1 1 xxx2251
PreTranslatorEntry Create 1 2 xxxxxxx
PreTranslatorEntry Create 1 3 3


listing out each of the DID numbers. You then would also have to define where they go to as follows:

/ PreTransId Entry OperId Operation Value
/ ---------- ----- ------ --------- -----
PreTranslatorOperation Create 1 1 410
PreTranslatorOperation Create 1 2 (extension to direct call at)


Just make sure that you keep the numbers in the first table 1, 2, 3, 4, 5 etc so that they match the pretranslator ID so 1 to 1 and 2 to 2 etc.


Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,256
Posts638,657
Members49,756
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
210,764 Shoretel
187,581 CTX100 install
186,326 1a2 system
Newest Members
Rich F, LewisR, TDKs79, Buttinset, Housetech
49,756 Registered Users
Top Posters(30 Days)
dexman 16
Toner 12
TDKs79 7
Who's Online Now
0 members (), 95 guests, and 46 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5