|
|
|
|
Joined: Dec 2001
Posts: 2
Member
|
OP
Member
Joined: Dec 2001
Posts: 2 |
Need Help.
I have just completed a network install for a small business and was asked to move an older phone system. A Mactrotel MT-16H,which I am told worked properly. The system was installed per the manual, but I am getting incorrect voltages from the KSU unit. It is putting out 31 V instead of 24 V, also a RED LED on the main board is "on". The Unit does not have an external battery backup.
I am also looking for a stocking distributor of used parts for Macrotel. I have email Macrotel but have not recieved any information for 4 weeks.
Any help you could supply would be greatly appriciated. Thanks
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Dec 2001
Posts: 99
Member
|
|
Member
Joined: Dec 2001
Posts: 99 |
See reply under general forum.
|
|
|
|
|
Joined: Jan 2002
Posts: 196
Member
|
|
Member
Joined: Jan 2002
Posts: 196 |
The following company was able to provide some limited assistance with the MT-16H in the past: Phone Ware, La Jolla, CA 858 459-4000 Possible contact: Brandon Good luck! <font face="Verdana, Arial" size="2">Originally posted by 392:
See reply under general forum.</font>
COMTEK Technologies, Inc.™ Information Technologies Integrators™ Celebrating 37+ Years Serving California & The Western United States! (619) 266-1000 • (800) 525-7100 an interCONNECT-IT™ company
|
|
|
|
Forums84
Topics94,306
Posts638,894
Members49,771
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (justbill),
55
guests, and
24
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
