I am trying to determine what the part number of this connector which is very close to an RJ45 could be.

It has two keys, one on the side, and another in the center of the contact area.

Seems it has a maximum of 6 contacts though it is the same dimensions as a standard RJ45 if two contacts were omitted from the center to make room for one of the keys.

Molded into three of the four round spots is 5PV, which doesn't seem to follow the standard RJ45 designation.

I have uploaded several images to my Drop box account.

While the only plug I have is a termination connector molded with black colored plastic, I have done my best to make the images viewable.

https://www.dropbox.com/scl/fi/ksqm...rlkey=kpq2ytdsv2f6eqdlzy8k8wj34&dl=0

https://www.dropbox.com/scl/fi/jze0...rlkey=q7u5niqjo8l7kk1g0elhalx6p&dl=0

https://www.dropbox.com/scl/fi/7qyu...rlkey=yqvmo3e3pdkznink0g7sntiw3&dl=0

https://www.dropbox.com/scl/fi/psvn...rlkey=gdhbd4png49ekc7nix6923yaf&dl=0

This is last image is compared end to end with a standard RJ45 Modular Plug.

https://www.dropbox.com/scl/fi/22vs...rlkey=6kigjloqehf8pqfiy43t92rxj&dl=0

This connector is found on a piece of IBM equipment from 1984. It is referred to as the model 6731.

Thanks all for viewing....

Last edited by DonaldR; 04/10/24 05:33 AM.
"Most people don't have a sense of humor. They think they do, but they don't." --Jonathan Winters