|
|
Joined: Feb 2010
Posts: 496 Likes: 1
Member
|
OP
Member
Joined: Feb 2010
Posts: 496 Likes: 1 |
I have a customer with Valcom 24V Paging horns in several bays using NEC Aspire phone system
The cable that has been running this has been there for probably 20 to 30 years (Cat 3 indoor cable) I may have installed it😳
They are having intermittent problems, so I am suggesting running a new cable
They have their own power supplies in each bay
The Cable is outside under an overhang (Loading Dock)
I was just going to run some cat six outside cable
Which I had in my truck until I realize that I only had about 400 feet but I needed about 700/800 feet I didn’t want to create any spices that were unnecessary
And then I was thinking, technically, I only need one pair For audio. Then I thought about running just regular speaker wire, which I did actually run 18/4
Then I realize that Valcom recommends just running regular telephone or data cable twisted pair
Do you think it will be a problem using the stranded 18/4
I’m assuming it’s going to still work it’s just I’m just wondering if it would’ve been better to run the regular Telephone/ Data
Thanks
JD
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
Forums84
Topics94,305
Posts638,892
Members49,770
|
Most Online5,661 May 23rd, 2018
|
|
2 members (pvj, Toner),
114
guests, and
155
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|