ATA Cisco SPA122 not triggering single line courtesy phone ringer|Sundance Business VOIP Telephone Help

Print Thread

Rate Thread

ATA Cisco SPA122 not triggering single line courtesy phone ringer #638403 09/25/20 10:42 PM
Joined: Apr 2009 Posts: 194 San Diego, CA Telesystems OP Member
OP Telesystems Member Joined: Apr 2009 Posts: 194 San Diego, CA	My customer is in process of converting from AT&T to Ring Central Office at Hand. I installed two ATA SPA122 Cisco devices. One is for the Fax machine, and works perfectly. The other one I have setup to ring a Trimline wall phone with no dial pad. In addition it is needed to ring an auxilliary ringer. The ringer looks like it might be a wheelock brand? Anyway, the ATA rings my buttset, but not the phone or aux ringer. An associate told me the ATA can be configured for Voltage or impedance?? Any help would be appreciated. I could not log in to the ATA, and Office at hand support were of no help. Thank you in advance as usual. Telesystems technician

Atcom VoIP Phones

Best VoIP Phones Canada

Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Entire Thread
Subject	Posted By	Posted
ATA Cisco SPA122 not triggering single line courtesy phone ringer	Telesystems	09/26/20 02:42 AM
Re: ATA Cisco SPA122 not triggering single line courtesy phone ringer	hitechcomm	09/26/20 06:05 PM
Re: ATA Cisco SPA122 not triggering single line courtesy phone ringer	Telesystems	09/27/20 07:03 PM
Re: ATA Cisco SPA122 not triggering single line courtesy phone ringer	Daniel	10/06/20 03:25 PM

Moderated by 5years&counting

Hop To

Link Copied to Clipboard

atcomsystems.ca/forum Forums VOIP Phones & IP PBX Cisco Telephones and Systems ATA Cisco SPA122 not triggering single line courtesy phone ringer