|
|
|
|
Joined: Feb 2005
Posts: 12,344 Likes: 3
Member
|
Member
Joined: Feb 2005
Posts: 12,344 Likes: 3 |
Dean's drawing is absolutely correct. I have done this a few times. I think Hbiss is probably correct with his assessment. Roadie has a valid suggestion, but I would look to page 6 on the bottom right, to be sure that you aren't exceeding length too badly. I know that I have exceed it a few times without dire results. If the existing speakers work then the new speakers should work if you connect the audio pair of the new run to the audio pair of the old run. Length is not critical. If you were able to make them work by connecting the audio pair directly to the BGM music source, you have all the information you need. The problem is where you have them connected. Check your work! -Hal
CALIFORNIA PROPOSITION 65 WARNING: Some comments made by me are known to the State of California to cause irreversible brain damage and serious mental disorders leading to confinement.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Forums84
Topics94,305
Posts638,893
Members49,771
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (JBean3329),
67
guests, and
27
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
