Hello.


The entire system is down. Individual phone only show the firmware version and a repeat clicking sound ever few seconds.

The IDCS 100 main system does have the flashing lights on the

I had this problem before a few years ago and it turned out to be the power supply which I replaced and fixed the problem. However now its different.

See past post here

https://sundance-communications.com...ard-for-idcs-100-release-2-sy#Post567664


The difference this time is the MCP1 are flashing.

Tested the power supply with the multimeter and it shows the -55 and +5 as indicated on the motherboard as it should be. Power supply lights are also on.

I also had a space IDCS100 from when I originally replaced the power supply back in 2006 I think and I replaced the entire motherboard but same problem.

Do you think my MCP1 processor is dead or maybe it has lost the firmware and need to be flashed back on the system?

Open to any help, suggestions, troubleshooting, etc...


Thanks.

Last edited by raidsystemtech; 02/03/19 01:24 AM.