I'm trying to configure delayed ringing by following the example from the NEC SV9100 certification course, but not getting the results I hoped for.
Scenario: All lines are POTS and are set to DIL to a VE (see below). Dept A has Line 1, 2, 3 that should ring on all Dept A extensions.
Dept B has Line 4 and 5 that should ring on all Dept B extensions.
If Line 4 or 5 aren't answered after 20 seconds, then the lines should start ringing on all Dept A extensions as VE 201. And of course, the opposite should happen: Dept A lines should ring on Dept B phones if not answered after 20 seconds as VE 202. And after all that, if still not answered, then to InMail.
I've played around with 15-09 and 15-11, among others, but don't get any immediate ringing. The lamp flashes, but no ring.
Is there any hope for me to straighten this out? My first 9100, and I'm learning a lot, but this old dog . . .
Thank you.
Jim
Last edited by Yoda; 01/08/17 01:16 AM.
