|
|
Joined: Jan 2014
Posts: 2
Member
|
OP
Member
Joined: Jan 2014
Posts: 2 |
Hi all, As far as I understand, for programming Toshiba stratagy DK models, I should connect 20button LCD phone(my model is DKT 2020) to either port 013 or 005. Since I don't know the location of extension No.205 in our office, I used extension 213 instead. I connected programmable phone to this extension socket but it didn't give me any beep tone neither by pressing PDN(intercom)button nor by releasing outside line! Does anyone know the reason for it?Is it right procedure or my method is wrong for programming? If I want to change call transfer extension (during system greeting), should I run program 09? Right now, system transfers to wrong extension when caller press 2. Thank you so much in advance
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
Forums84
Topics94,306
Posts638,894
Members49,771
|
Most Online5,661 May 23rd, 2018
|
|
1 members (justbill),
67
guests, and
29
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|