|
|
Joined: Feb 2009
Posts: 2
Member
|
OP
Member
Joined: Feb 2009
Posts: 2 |
Not a telecom guy but had it tossed on my plate because I'm network support. Before going back to our installers I found this board, I've learned much just reading through other posts. My problem seems small, I have an office where two stations ring on direct in. Until Saturday the ringer was loud on both. (loud = easily heard across the room, 20ft.) Now the loudest setting (4) can barely be heard standing next to it. The loudness does adjust through the 4 levels as pressed but 1 cannot be heard and 4 is like 1 on other units. Before I replace the hardware I was hoping for suggestions. Thanks, Joe
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
Forums84
Topics94,306
Posts638,894
Members49,771
|
Most Online5,661 May 23rd, 2018
|
|
1 members (phonman123),
55
guests, and
31
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|