|
|
|
|
|
 Telephone Tech Talk
 Panasonic
 Panasonic KX T7030X
|
 UBBFriend: Email This Page to Someone! |
next newest topic | next oldest topic |
| Author | Topic: Panasonic KX T7030X |
|
Rossco Member Posts: 1 |
posted October 19, 2004 07:10
  
I am working in a building where two firms are located. We bothe use the same telephone system and telephones, Panasonic KX T7030. I have recently moved office where the other firm had occupied. They are still in the building and their phone is still in the office. There are two sets of lines, one allocated to us and the other allocated to them. My question is can I configure the phone so that I can make outgoing calls or will I need to get someone in to install a new telephone line? IP: Logged |
|
HtownDan Moderator Posts: 438 |
posted October 19, 2004 11:11
yes you can program that extension to have access to the lines you need. more information will be required on the phone system type. IP: Logged |
|
MrGemini Moderator Posts: 1065 |
posted October 19, 2004 11:12
Roosco, I'm not sure at all what your asking but provide us with he model of the system not the phones. It's probably an old anaolg Easa-Phone. The system can be reprogrammed if need be to suit your needs. IP: Logged |
|
hogsicnarf Member Posts: 9 |
posted March 09, 2005 20:28
Hi, wondering if anyone knows where can I get the manual for KX-T7030X. Tx. IP: Logged |
|
MrGemini Moderator Posts: 1065 |
posted March 10, 2005 06:43
hogsicnarf, complete your profile and I'll see if I can dig one up somewhere. IP: Logged |
|
hogsicnarf Member Posts: 9 |
posted March 10, 2005 22:56
Here you go MRGemini ..... IP: Logged |
|
hogsicnarf Member Posts: 9 |
posted March 15, 2005 21:10
Hi Gemini, any luck finding? IP: Logged |
|
MrGemini Moderator Posts: 1065 |
posted March 16, 2005 06:32
hogsicnarf, I have a small user manual for a 7030 but we still have no e mail address for you. IP: Logged |
|
paul144 Installer Posts: 820 |
posted March 16, 2005 06:43
Also, as was stated above, acess to lines is not in the user's guide for the phone. For programming, you need to know what system it is on. Somewhere (probably in a broom closet) there is a central box that actually controls all of the phones. You need to get the model # off of that box. ------------------ [This message has been edited by paul144 (edited March 16, 2005).] IP: Logged |
|
hogsicnarf Member Posts: 9 |
posted March 16, 2005 18:54
Oops, missed out the field to enable email sending. IP: Logged |
|
hogsicnarf Member Posts: 9 |
posted March 16, 2005 18:56
Hi Paul, The model is KX-TA308. I tried http://www.p1bc.com/ but the manual is not available there ..... tx. IP: Logged |
|
austintelecom Installer Posts: 51 |
posted March 16, 2005 21:53
[QUOTE]Originally posted by hogsicnarf: [B]Hi Paul, The model is KX-TA308. -Joe IP: Logged |
|
hogsicnarf Member Posts: 9 |
posted March 17, 2005 21:53
Hmm ..... that is bad .... We also have some KX-T7433 in the office, any idea if there's any manual for it. Basically, what we need here is some instruction on on call storing of numbers in memory, forwarding,Do-not-disturb,messages etc .... Tx ..... IP: Logged |
|
Armando Member Posts: 1 |
posted June 15, 2005 14:00
Hi i´m looking for a manual for the KX-T7030X, I need to reprogram all the sistem and I´m lost, the all sistem is conected to a 616 easa-phone central, please if you have any manual i will thank you IP: Logged |
All times are ET (US) | next newest topic | next oldest topic |
  |
|
Sundance Communications 1999
Powered by Infopop www.infopop.com © 2000
Ultimate Bulletin Board 5.47e